Product category
CONTACT US
13901448555
YangZhou RunQi Toelectric Technology Co. Ltd.
linkman：Mr. Zhang
Mobile：13901448555
Tel：0514-84399338
Email：376081334@qq.com
Address：Guo Ji industrial concentrated area in Gaoyou, Yangzhou
linkman：Mr. Zhang
Mobile：13901448555
Tel：0514-84399338
Email：376081334@qq.com
Address：Guo Ji industrial concentrated area in Gaoyou, Yangzhou
Industry Small encyclopedia
网站当前位置：网站首页 > Industry Small encyclopedia- Day-to-day maintenance of solar street lamps
- 2018-6-6 阅读次数：[1187]
-
Solar street lamps are powered by solar energy, and outdoor work is affected by natural factors. Over a long period of time, the dust on the battery panels is too much or is covered by snow cover in winter. The conversion rate of photoelectric conversion decreases, charging is insufficient, and the battery capacity is not enough. Therefore, after the installation of solar street lamps, we should regularly organize personnel to carry out a thorough examination of the battery board, in order to make the battery board run in a good condition for a long time, to ensure the normal use of street lamps, and to create more economic benefits. The following is the attention of the Yangzhou street lamp manufacturer, Yangzhou run Qi photoelectricity, on the routine maintenance and inspection of solar panels.
Methods / steps
1. check whether the battery is damaged or not, so that we can detect it in time and replace it in time.
2. check whether the battery connecting line and ground wire are in good contact and whether there is any shedding.
3. check whether there is any loosening or breakage of the battery panel support.
4. check and clean the panels around the surface.
5. check the bird droppings on the surface of the battery panels and clean them if necessary.
In addition to cleaning up and protecting battery panels, there are also solutions to solar array maintenance.
1. in case of gale, rainstorm, hail and heavy snow, measures should be taken to protect the solar array, so as to avoid damage.
2. the lighting surface of the solar cell square should be kept clean, such as dust or other dirt, it should be rinsed with clean water first, then clean the trace of water with clean gauze, and do not use hard or corrosive solvent to wash and test.
3. the battery pack matching with the solar cell array should be strictly used according to the maintenance and usage of the battery.
4. regularly check the wiring of the solar street lamp electrical system to avoid loosening of the wiring.
-
上一张：Solar street lamp manufacturers tell you the advantages of solar street lamps.
下一张：What are the technical requirements of the signal lamppost